1600℃ Inclined Rotating Tube Furnace

Model：KJ-T1600-L5015-SWQ

Description：

The 1600℃ inclined rotary tube furnace is a CE-certified inclined rotary tube furnace with 1600℃ three temperature zones. It is designed for uniform sintering of powder at high temperature;

Product introduction:
The 1600℃ inclined rotary tube furnace is a CE-certified inclined rotary tube furnace with 1600℃ three temperature zones. It is designed for uniform sintering of powder at high temperature; each temperature zone consists of three An independent temperature control system is individually controlled. By adjusting the temperature of each temperature zone, a temperature gradient can be formed in the heating zone or a longer constant temperature zone can be formed. Each temperature control system is adjusted in PID mode, and 30 sections of temperature rise and fall programs can be set, and the B-type thermocouple is used for temperature measurement and control, and its temperature control accuracy can reach +/- 1℃.

Technical Parameter:

product name	1600℃ Three Temperature Zone Inclined Rotating Tube Furnace
Product number	KJ-T1600-L5015-SWQ
Shell structure	Double shell with air cooling system
Furnace material	Furnace uses alumina polycrystalline fiber
Furnace tube size approximately	Φ50×1500mm
Heating zone	Three temperature zone heating, each temperature zone 220mm
Furnace tube material	Corundum furnace tube
Operating temperature	1500°C
Maximum temperature	1600°C
Temperature control method	Three temperature zones independently control temperature, each zone can realize intelligent 30-segment PID programmable control, with over-temperature and burnout protection functions
Flange joint	Equipped with two stainless steel vacuum flanges, mechanical pressure gauge has been installed
Sealing system	The furnace tube and flange are extruded and sealed with a silicone O-ring, which is easy to disassemble and reassemble, and has good air tightness. Vacuum and atmosphere can be evacuated during rotation.
Heating rate	0-10℃/min
Heating element	MOSI2
Operating Voltage	AC 220/380V 50Hz
Maximum power approx.	10KW
Temperature measuring element	3 B-type thermocouples, independent temperature control
Vacuum	Pre-evacuated to -0.1MPa (value of vacuum pressure gauge)
Accessible atmosphere	Inert gas (slightly positive pressure)
Provide related accessories	Crucible tongs, high temperature gloves, thermocouple, furnace plug, manual, warranty card, etc.
After-sales service	12-month warranty and lifetime warranty (except vulnerable parts)